Belt compressor is one of the types of air compressors. This compressor is mostly used for industrial purposes. These compressors, like cylindrical compressors, have sound and vibration. Oil is used to lubricate the compressor parts of the belt.

Belt compressors have large tanks with a minimum tank capacity of 80 liters. Unlike other compressors, this model is not available in small sizes.

The components of this compressor are an alternator and an air conditioning unit along with the tank and special accessories for the air compressor (gauge, shut-off switch, safety valve, one-way valve, outlet valve, tank drain valve).

They use single-phase and three-phase belt compressors, which can be selected depending on the type of need. Belt compressors have a very high wind power and can be used permanently.

The output night pressure of these compressors is 8 times, which is set by default. If you need more wind pressure, they also have the ability to increase the pressure, but the engine will be severely pressurized and the useful life of the device will be reduced.

First of all, you need to know which volume of the tank compressor is the volatile belt that meets your needs. The next case is the thickness of the tank sheet, if you choose a tank with ordinary sheet, there is a possibility of rot and perforation of the tank after a short time.

In most cases, operators forget to drain the fluids inside the compressor tank regularly, and this causes the tank to leak, so it is better for the tank sheet to be at least 3 miles thick than if the compressor tank is drained. It was not done regularly so that the tank would not rot.

The next case is whether the tank is wheeled or not. If the belt compressor is to be stored in an environment for a long time, it is better to use fixed tanks.

One of the advantages of wheelless tanks in belt compressors is that strong rubber suede is used under the tank instead of wheels, which greatly reduces the vibration of the compressor.

If the belt compressor is to be moved, it is better to choose a wheeled tank so that you can easily move the compressor wherever it is needed.

Try to avoid standing tanks as much as possible, the reason for this is that in many cases we have seen the compressors fall with the standing tank (various reasons for the judge to fall, including the objects themselves with the compressor, pulling the hoses too much that They are connected to the tank, falling while moving the compressor, etc.), which causes most of the equipment installed on the tank to be broken.

The next thing that is very important is the quality of the parts that are installed on the tank, including the compressor pressure gauge, safety valve, compressor shut-off switch, compressor one-way valve and outlet valve, each of which is described separately in the relevant pages. .

Please be extremely careful so that the compressor wind does not have a problem after a while. If you need advice, you can call the consulting unit of Iran Pump Company at 05138595333.

After the air compressor tank and accessories, it is the turn of the main components of the belt air compressor, namely the air conditioner and alternator unit.

Belt air pump motor can be selected in two forms, single-phase and three-phase, which can be selected depending on the type of electricity as well as the type of activity. If you have industrial consumption, three-phase compressors are the best offer, which have much more power than single-phase.

If you have semi-industrial consumption and use single-phase electricity, then naturally the best choice is Takfar belt air compressor with maximum power. The wind pressure produced by belt compressors (single-phase-three-phase) is 8 times as standard, which, of course, can be upgraded. They also have.

Just keep in mind that if you increase the air pressure more than the standard, there will be a lot of pressure on the belt air pump motor, which will not result in anything other than reducing the useful life of the device.

It is best to consult before buying so that you do not have further problems. Belt compressor dynamos have different powers that start from one horse and change depending on the need.

Note that the coil must be made of copper to have better performance. Currently, there are different dynamos with different brands in the market. This also applies to the air conditioning unit. One of the best ways to choose an air compressor is to have spare parts for the device you want to buy.

It can be repaired if the belt air pump has a problem. There are many brands of belt compressors that unfortunately do not have spare parts on the market, so they are either not repaired, or if they are repaired, they will cost a lot.

Iran Pump Company is a manufacturer of various types of air compressors in Iran. When buying or consulting about different types of air compressors, the best way is to get pre-purchase advice. Our colleagues in the pre-purchase consulting department are ready to answer your questions about different types of air compressors. They are to guide you in the best way. If you wish, you can write in the free consultation section of the telephone and what the air compressor is going to do for you, so that our colleagues can contact us as soon as possible.